Hampton HR2-861 冷冻油 Santovac Cryo Oil

Hampton HR2-861 冷冻油 Santovac Cryo Oil

Hampton HR2-861 Santovac Cryo Oil

Hampton research蛋白结晶试剂代理–上海金畔生物
代理优势:货期3-4周。
欢迎访问Hampton research官网或者咨询我们获取更多产品信息。

 Optimize Reagents Optimize – Cryoprotectants Santovac Cryo Oil

APPLICATIONS  应用

  • Oil based cryoprotectant  油基冷冻保护剂

FEATURES  特征

  • Low viscosity
  • Low surface tension
  • Cryoprotectant for soluble and membrane protein crystals
  • Not miscible with most solvents
  • Non toxic, non penetrating cryoprotectant

低粘度
低表面张力
可溶性蛋白和膜蛋白晶体的冷冻保护剂
与大多数溶剂不混溶
无毒、非渗透性冷冻保护剂

DESCRIPTION  描述

Used during cryocrystallography to displace and reduce the amount of water (mother liquor, reagent) on the crystal after the crystal is mounted in a cryoloop. Coating the crystal with oil can minimize evaporation from the crystal and reduce exposure and slow diffusion of air (oxygen) to the crystal.

Santovac Cryo Oil offers low viscosity, incredibly low vapor pressure, low surface tension, excellent chemical inertness and excellent thermal stability.

Dip the mounted crystal into the oil to displace surface water. Or add a small amount of Santovac to the crystallization drop before mounting the crystal. After adding the Santovac, mount the crystal using a Mounted Cryoloop. Withdraw the mounted crystal from the drop and the Santovac will coat the mounted crystal. Cryogenically cool the mounted crystal.

Santovac (Santovac 5) is a five ring polyphenyl ether (PPE) with very low vapor pressure and low reactivity. The oil is highly resistant to oxidation. The only elements in the pure polyphenyl ether are oxygen, hydrogen and carbon.

The fluid is chemically stable, non-corrosive, safe and non-toxic at normal operating temperatures.

Santovac is not miscible with water, paraffin oil, silicon oil, alkanes, or Parabar 10312 (Paratone). Santovac is miscible with acetone. Shelf life 5 years.

Santovac® is a trademark of Santovac® Fluids.

在冷冻晶体学期间用于在晶体安装在冷冻环中后置换和减少晶体上的水(母液、试剂)的量。用油涂覆晶体可以最大限度地减少晶体的蒸发,并减少空气(氧气)对晶体的暴露和缓慢扩散。

Santovac Cryo Oil 具有低粘度、极低的蒸气压、低表面张力、出色的化学惰性和出色的热稳定性。

将镶嵌好的晶体浸入油中以置换地表水。或者在安装晶体之前向结晶滴中加入少量的 Santovac。添加 Santovac 后,使用 Mounted Cryoloop 安装晶体。从液滴中取出已安装的晶体,Santovac 将涂覆已安装的晶体。低温冷却安装的晶体。

Santovac (Santovac 5) 是一种具有极低蒸气压和低反应性的五环聚苯醚 (PPE)。该油具有很强的抗氧化性。纯聚苯醚中唯一的元素是氧、氢和碳。

该流体在正常工作温度下化学性质稳定、无腐蚀性、安全且无毒。

Santovac 与水、石蜡油、硅油、烷烃或 Parabar 10312 (Paratone) 不混溶。 Santovac 可与丙酮混溶。保质期5年。

Santovac® 是 Santovac® Fluids 的商标。

HR2-861  Santovac Cryo Oil 1 mL

RELATED ITEM(S)
CryoPro

REFERENCES   参考文献
1. Structure of the ‘open’ form of Aspergillus nidulans 3-dehydroquinate synthase at 1.7 Å resolution from crystal grown following enzyme turnover. C.E. Nichols, A.R. Hawkins and D.K. Stammersa. Acta Crystallographic Section D, Volume 60, Part 5, Pages 971-973, May 2004.

2. Crystal Structure of the Caspase Activator Human Granzyme B, a Proteinase Highly Specific for an Asp-P1 Residue. E. Estebanez-Perpina et al. Biol. Chem., Vol. 381, pp. 1203-1214, December 2000.

Hampton蛋白结晶工具

Hampton蛋白结晶工具

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™ – 20 micron

HR4-974 18 mm Mounted CryoLoop 0.7 - 1.0 mm

HR4-974

Mounted CryoLoop™ – 20 micron

APPLICATIONS

  • Cryocrystallography

HR4-965 Mounted CryoLoop 0.7 - 1.0 mm

HR4-965

Hampton 蛋白结晶loop环 Mounted CryoLoop 10 micron with EasySnap MicroTube

HR4-994 Mounted CryoLoop 0.025 - 0.05 mm

CAT NO NAME DESCRIPTION
HR4-994 Mounted CryoLoop – 10 micron 0.025-0.05 mm – 25 pack
HR4-995 Mounted CryoLoop – 10 micron 0.05 – 0.1 mm – 25 pack
HR4-997 Mounted CryoLoop – 10 micron 0.1 – 0.2 mm – 25 pack
HR4-999 Mounted CryoLoop – 10 micron 0.2 – 0.3 mm – 25 pack

Adjustable Mounted CryoLoop™ with EasySnap MicroTube

HR8-110 Adjustable Mounted CryoLoop 0.7 - 1.0 mm

Applications
Cryocrystallography
Features
Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop

Description 
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.

Using forceps or a probe one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.

CAT NO NAME DESCRIPTION
HR4-338 Adjustable Mounted CryoLoop 0.05 – 0.1 mm – 25 pack
HR5-900 Adjustable Mounted CryoLoop Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)
HR4-336 Adjustable Mounted CryoLoop 0.025 – 0.05 mm – 25 pack
HR8-102 Adjustable Mounted CryoLoop 0.1 – 0.2 mm – 25 pack
HR8-072 Adjustable Mounted CryoLoop 0.2 – 0.3 mm – 25 pack
HR8-104 Adjustable Mounted CryoLoop 0.3 – 0.4 mm – 25 pack
HR8-106 Adjustable Mounted CryoLoop 0.4 – 0.5 mm – 25 pack
HR8-108 Adjustable Mounted CryoLoop 0.5 – 0.7 mm – 25 pack
HR8-110 Adjustable Mounted CryoLoop 0.7 – 1.0 mm – 25 pack

Hampton蛋白结晶小瓶和结晶瓶帽 CrystalCap™

CrystalCap™ ALS

Applications  应用
Cryocrystallography   低温晶体学
Features  特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状

Description 
The CrystalCap ALS is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

CrystalCap ALS (HR4-779) is supplied without a vial (HR4-904).

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS is compatible with ALS style grippers, auto mounters and sample handlers.

ALS style sample mounters accept the CrystalCap ALS.

HR4-779    CrystalCap ALS     without Vial – 60 pack

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers

CrystalCap

APPLICATIONS

  • Cryocrystallography

FEATURES

  • SSRL style sample mount for cryocrystallography
  • CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers
CAT NO NAME DESCRIPTION
HR4-733 CrystalCap with Vial – 60 pack
HR4-902 CrystalCap without Vial – 60 pack
HR4-904 CrystalCap Vial Vial only – 30 pack

CrystalCap & Vial

Hampton CrystalCap™ SPINE HT

Applications  应用
Cryocrystallography   低温晶体学

Features   特征
SPINE style sample mount for cryocrystallography
CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base

Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers

2D alphanumeric coding for sample tracking & management
Bar coded, color coded, alphanumeric, magnetic cap
Color coded CryoLoop size

用于低温晶体学的 SPINE 型样品架
CrystalCap SPINE HT 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座

镂空设计与 SPINE 型夹持器、自动贴片机和样品处理器兼容

用于样本跟踪和管理的 2D 字母数字编码
条形码、颜色编码、字母数字、磁性帽
颜色编码的 CryoLoop 尺寸

Description
The CrystalCap SPINE HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept SPINE style caps. The CrystalCap SPINE HT attaches to a magnetic CrystalCap SPINE Vial and magnetic goniometer base. The tip of the CrystalCap SPINE HT accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap SPINE Vial is a 1.8 ml cryo vial featuring two small vents and is compatible with the CrystalCap SPINE HT. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The CrystalCap SPINE Vial features chamfered edges for enhanced cap positioning as well as a magnetic alloy bottom for stability. The HR8-114 CrystalCap SPINE Vial does have a magnet on the bottom of the vial.

The hollowed out design of the CrystalCap SPINE HT is compatible with SPINE style grippers, auto mounters and sample handlers.

The CrystalCap SPINE HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-118 CrystalCap SPINE HT 0.025-0.05 mm CryoLoop, without Vial – 30 pack
HR8-120 CrystalCap SPINE HT 0.05-0.1 mm CryoLoop, without Vial – 30 pack
HR8-122 CrystalCap SPINE HT 0.1-0.2 mm CryoLoop, without Vial – 30 pack
HR8-124 CrystalCap SPINE HT 0.2-0.3 mm CryoLoop, without Vial – 30 pack
HR8-126 CrystalCap SPINE HT 0.3-0.4 mm CryoLoop, without Vial – 30 pack
HR8-128 CrystalCap SPINE HT 0.4-0.5 mm CryoLoop, without Vial – 30 pack
HR8-130 CrystalCap SPINE HT 0.5-0.7mm CryoLoop, without Vial – 30 pack
HR8-132 CrystalCap SPINE HT 0.7-1.0 mm CryoLoop, without Vial – 30 pack
HR8-112 CrystalCap SPINE HT Cap only – 30 pack
HR8-116 CrystalCap SPINE HT Cap/Vial Cap/Vial only – 30 pack
HR8-094 CrystalCap SPINE without 2D code/printing Cap only – 30 pack
HR8-114 CrystalCap SPINE Vial Vial only – 30 pack

CrystalCap™ ALS HT

Applications  应用

Cryocrystallography  低温晶体学

Features  特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
2D alphanumeric coding for sample tracking & management
Color coded CryoLoop size

用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS HT 磁性连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状
用于样本跟踪和管理的 2D 字母数字编码
颜色编码的 CryoLoop 尺寸


Description
The CrystalCap ALS HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS HT attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS HT is compatible with ALS style grippers, auto mounters and sample handlers.

The CrystalCap ALS HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-200 CrystalCap ALS HT 0.025-0.05 mm CryoLoop – 30 pack
HR8-202 CrystalCap ALS HT 0.05-0.1 mm CryoLoop – 30 pack
HR8-204 CrystalCap ALS HT 0.1-0.2 mm CryoLoop – 30 pack
HR8-206 CrystalCap ALS HT 0.2-0.3 mm CryoLoop – 30 pack
HR8-208 CrystalCap ALS HT 0.3-0.4 mm CryoLoop – 30 pack

Hampton 石英毛细管 Quartz Capillaries

Applications  应用

X-ray data collection   X射线数据采集
Liquid-liquid diffusion crystallization  液-液扩散结晶
Gel acupuncture crystallization  凝胶针灸结晶

Features  特征
Quartz  石英
Thin walled – 10 micron  薄壁 – 10 微米

CAT NO NAME DESCRIPTION
HR6-128 Quartz Capillary Size: 0.1 mm – 25 pack
HR6-130 Quartz Capillary Size: 0.2 mm – 25 pack
HR6-132 Quartz Capillary Size: 0.3 mm – 25 pack
HR6-134 Quartz Capillary Size: 0.4 mm – 25 pack
HR6-136 Quartz Capillary Size: 0.5 mm – 25 pack
HR6-138 Quartz Capillary Size: 0.6 mm – 25 pack
HR6-140 Quartz Capillary Size: 0.7 mm – 25 pack
HR6-142 Quartz Capillary Size: 0.8 mm – 25 pack
HR6-144 Quartz Capillary Size: 0.9 mm – 25 pack
HR6-146 Quartz Capillary Size: 1.0 mm – 25 pack
HR6-148 Quartz Capillary Size: 1.5 mm – 25 pack
HR6-150 Quartz Capillary Size: 2.0 mm – 25 pack
HR6-151 Quartz Capillary Size: 2.5 mm – 15 pack
HR6-175 Quartz Capillary Size: 3.0 mm – 15 pack
HR6-177 Quartz Capillary Size: 4.0 mm – 5 pack
HR6-179 Quartz Capillary Size: 5.0 mm – 5 pack
低温泡沫杜瓦瓶 Spearlab Cryogenic Foam Dewars

Applications 应用

Cryocrystallography 蛋白结晶学

Spearlab Dewars
HR4-676 Cryogenic Foam Dewar (130 ml) – Mini each
HR4-662 Cryogenic Foam Dewar (500 ml) – Small each
HR4-673 Cryogenic Foam Dewar (800 ml) – Standard each
HR4-674 Cryogenic Foam Dewar (1400 ml) – Large each
HR4-675 Cryogenic Foam Dewar (2 liter) – Tall each

Hampton 结晶板封口膜 ClearSeal Film™ and Applicator

Applications 应用

Sealing film used to seal sitting drop crystallization experiments  使用密封膜来密封座滴板结晶实验

Features  特征
1.High optical clarity, low auto-fluorescence
2.Easy to handle film; easy to remove liner
3.Pressure sensitive adhesive
4.For best results use specially designed applicator
5.UV transmissable, compatible with UV imaging systems
6.Low birefringence
7.Certified DNase-, RNase-, and nucleic-acid-free
8.Silicone adhesive is non-tacky until pressed against the sealing surface with the applicator
9.Chemically inert; no extractable except at extreme pH
10.Excellent chemical resistance (e.g. DMSO, Methanol, Acetonitrile)
11.Heat and cold resistant, recommended for temperatures from -70°C and 110°C

特征
高光学透明度、低自体荧光
膜易于处理 ;易拆卸衬垫
压力敏感粘合剂
为了获得佳效果 , 请使用专门设计的涂抹器
传染性紫外、紫外成像系统兼容
低双折射
认证 DNase – , RNase – , 和核酸的游离
硅酮粘合剂是无粘性的 , 直到压在密封表面与涂抹器
化学惰性的 ;除了极端 pH 不能提取优异的耐化学性 (如。DMSO 、甲醇、乙腈)
耐热耐寒 , 温度从 – 70 ° C 至 110 ° C

Crystal Clear Sealing Film

APPLICATIONS  应用

  • Sealing film used to seal sitting drop crystallization experiments

密封膜用于密封坐滴结晶实验

FEATURES   特征

  • Fits SBS format microplates
  • No special applicator required
  • Optically clear

适合 SBS 格式的微孔板
无需特殊涂抹器
光学透明

DESCRIPTION  描述

Crystal Clear Sealing Film is an optically transparent sealing film for SBS format 24, 48, 96 and 384 well plates. The 2 mil +/-10% (0.05 mm) thick, optically clear, non-fluorescing polyester film with 1.0 – 1.3 mil (0.025 mm) thick acrylic custom adhesive is designed for the convenient and secure sealing of crystallization plates. A split, optically opaque 2.0 mil +/-10% polyester backing with two end tabs assures a clean uniform adhesive layer and allows for easy, accurate positioning on the plate. Before use, peel off the opaque center protective polyester backing to reveal the optically clear sealing film. Film length: 5.625″ +/- 0.015 Film width: 3.125″ +/- 0.015 End tabs: 0.375″ +/- 0.015 Perforations: 0.415″ +/- 0.015 from edge of film Corner radius: 3/32″. Free of detectable levels of DNase-, RNase- and Human/Mouse DNA contamination (PCR Certified), non-sterile. Recommended temperatures from -40 to +120°C. Not recommended for UV imaging.

Crystal Clear Sealing Film 是一种光学透明密封膜,适用于 SBS 格式 24、48、96 和 384 孔板。 2 mil +/-10% (0.05 mm) 厚、光学透明、无荧光的聚酯薄膜和 1.0 – 1.3 mil (0.025 mm) 厚的丙烯酸定制粘合剂专为方便和安全地密封结晶板而设计。带有两个末端标签的分离、光学不透明的 2.0 mil +/-10% 聚酯背衬可确保清洁均匀的粘合剂层,并允许在板上轻松、准确地定位。使用前,撕下不透明的中央保护聚酯背衬,露出光学透明的密封膜。胶片长度:5.625″ +/- 0.015 胶片宽度:3.125″ +/- 0.015 端片:0.375″ +/- 0.015 穿孔:距胶片边缘 0.415″ +/- 0.015 角半径:3/32″。不可检测DNase-、RNase- 和人类/小鼠 DNA 污染(PCR 认证)的水平,非无菌。推荐温度为 -40 至 +120°C。不推荐用于紫外线成像。

Film Sealing Paddle  薄膜密封辅助板

APPLICATIONS  应用

  • Even and secure application of sealing films to crystallization plates   将密封膜均匀且安全地应用到结晶板上

FEATURES  特征

  • White, polyethyelene plastic
    • 5 paddles per pack
    • 2.958″ short side width, 3.250″ long side width, 0.125″ thick
    • Less firm than gold paddle
  • 白色,聚乙烯塑料
    每包 5 个桨
    2.958″ 短边宽,3.250″ 长边宽,0.125″ 厚
    不如金桨结实
  • Gold, plastic, nylon reinforced edge
    • 1 paddle per pack
    • 3 7/8″ wide x 2 15/16″ tall
    • More firm than white paddle
  • 金色、塑料、尼龙加强边
    每包 1 个桨
    3 7/8 英寸宽 x 2 15/16 英寸高
    比白桨更结实

HR4-413 Film Sealing Paddle – White 5 pack
HR4-525 3M Sealing Paddle – Gold Each

Hampton 石蜡和硅润滑油 Paraffin & Silicon Oil

Applications  应用
Microbatch crystallization    microbatch 结晶
Features  特征
Under oil crystallization 在油中结晶
Protect the sample from oxidation  保护样品免于氧化
Screen different temperatures without condensation   屏幕不同温度下不凝结
Description   描述 
Oils used for microbatch and modified microbatch crystallization under oil.

使用的油和改性 microbatch microbatch 结晶油。

Al’s Oil is a 50:50 (volume:volume) mixture of Paraffin Oil and Silicon Oil. Al’s Oil is named after it’s inventor, Allan D’Arcy.

Al 是机油的 50 ∶ 50 (体积 ∶ 体积) 混合物的石蜡油和硅油。Al 的石油是其发明者的名字命名 , Allan D ‘Arcy) 。

Silicon Oil

Paraffin oil
Synonym: Mineral oil
CAS Number [8042-47-5]
EC Number 232-455-8
RTECS PY8047000
MDL Number MFCD00131611
Appearance Colorless, clear, viscous liquid
Refractive Index n20/D 1.467 (literature) n20/D 1.468
IR Spectroscopy Grade
Density 0.838 g/mL at 25°C (literature) 0.85 g/ml at 20°C
Viscosity 40-42 CST at 25°C

Silicon Oil 
Synonyms: Octamethyltrisiloxane
CAS Number: 107-51-7
Appearance: Colorless, clear viscous liquid
Melting Point: -86°C
Boiling Point: 152°C
Refractive Index: 1.38 at 25°C
Viscosity: 1 CST at 25°C
Specific Gravity: 0.82 at 25°C
Density: 0.82 g/mL at 25°C
Surface Tension: 17.4 mN/m

Vial Clamp™ – Straight
ApplicationsVial support and manipulation
FeaturesStraight end tipHemostat style closureDescription
The Vial Clamp™ – Straight is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems™ straight when the clamp is closed. The clamp can be locked using the hemostat style closure. This clamp makes it easy to dip the storage vial into liquid nitrogen for crystal storage. The complete length of the clamp is straight, with an overall length of 195 mm. When the vial is placed in the clamp, the length of it is positioned perpendicular, 90° to the length of the clamp.
HR4-670 Vial Clamp - Straight
HR4-670 Vial Clamp – Straight 结晶瓶夹子 each
CrystalWand™ Magnetic
Applications
CrystalCap Magnetic & CrystalCap Copper Magnetic handling tool
结晶帽磁性&结晶帽铜磁性处理工具
Description
The CrystalWand Magnetic is designed to be used exclusively with the CrystalCap Magnetic, CrystalCap Copper Magnetic, and CrystalCap HT systems during transfer of the caps from the vial to the goniometer head and from the goniometer to the vial. The 6 1/2” (165 mm) long chrome plated steel wand features a plastic housing enclosing a spring tensioned plunger that when depressed, moves a non-magnetic steel platform away from the magnet housed in the end of the wand. This causes the steel CrystalCap to detach from the wand and be placed readily into the vial or the CryoTong™. When the platform is retracted, the wand securely holds the steel CrystalCap Magnetic. The CrystalWand Magnetic 45° (McMiken Tool) offers the same functionality but is bent at a 45° angle at approximately 2.5 cm from the magnet end.
HR4-729 CrystalWand Magnetic, Straight
HR4-315 CrystalWand Magnetic, 45° (McMiken Tool)
 
Vial Clamp™ – Curved
ApplicationsVial support & manipulation
FeaturesCurved end tipHemostat style closureDescription
The Vial Clamp – Curved is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems at an angle when the clamp is closed. The clamp can be locked using the hemostat style closure. The end of the clamp, where the vial is held, is curved at either a 45°/135° or 110°/ 70° angle. When the vial is placed in the clamp, the length of it is positioned to the clamp at either of those same angles. The overall length of each clamp is the same, 195 mm.
HR4-671 Vial Clamp – Curved 45°/135°
HR4-672 Vial Clamp – Curved 110°/70°
Cap Container (empty)

Applications

Holds 30 CrystalCap caps for storage or transport
Features
Black polypropylene box with overlap snap closure
Holds 30 caps with or without Mounted CryoLoops™
Description 
Empty black plastic box designed to hold 30 CrystalCap Copper Magnetic HT, CrystalCap Copper Magnetic ALS HT, CrystalCap HT (SPINE), CrystalCap Magnetic or CrystalCap Copper Magnetic without vials. Useful for shipping caps that do not need to be frozen or returning used caps home after a synchrotron trip. The Cap Container is designed for use with Caps only and does not accommodate vials.

HR8-016 Cap Container Opened

HR8-016 Cap Container empty  底座盒子 each

18 mm Siliconized Glass Cover Slides

APPLICATIONS 应用

  • Siliconized glass cover slides for hanging & sitting drop crystallization
  • Hanging drop crystallization
  • Sitting drop crystallization
  • Sandwich drop crystallization

用于悬挂和坐滴结晶的硅化玻璃盖玻片
悬滴结晶
坐滴结晶
夹心滴结晶

FEATURES  特征

  • High purity of glass
  • Siliconized, hydrophobic glass surface
  • 0.22 mm & 0.96 mm glass thickness
  • 18 mm glass diameter
  • Circle
  • 0.22 mm glass thickness is UV Compatible (>85% transmission)

玻璃纯度高
硅化疏水玻璃表面
0.22 毫米和 0.96 毫米玻璃厚度
18 毫米玻璃直径
圆圈
0.22 毫米玻璃厚度与紫外线兼容(> 85% 透射率)

12 mm Siliconized Glass Cover Slides HR3-278T Siliconized circle cover slides for Tecan robot
HR3-277 12 mm x 0.22 mm Siliconized circle cover slides
HR3-279 12 mm x 0.22 mm Siliconized circle cover slides
HR8-088 12mmx0.96mmThick Siliconized circle cover slides
HR8-090 12mmx0.96mm Thick Siliconized circle cover slides
22 mm Siliconized Glass Cover Slides HR3-231 22 mm x 0.22 mm Siliconized circle cover slides
HR3-233 22 mm x 0.22 mm Siliconized circle cover slides
HR3-247 22 mm x 0.96 mm Thick Siliconized circle cover slides
HR3-249 22mmx 0.96mm Thick Siliconized circle cover slides
HR3-215 22 mm x 0.22 mm Siliconized square cover slides
HR3-217 22 mm x 0.22 mm Siliconized square cover slides
HR3-223 22mmx0.96mm Thick Siliconized square cover slides
HR3-225 22mmx0.96mm Thick Siliconized square cover slides

Hampton 水晶透明密封带Crystal Clear Sealing Tape

3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)

Hampton HR4-316胶 Super Glue

Loctite® Easy-Squeeze Super Glue Gel

APPLICATIONS

  • Staking Glass Fibers to Brass Specimen Pins.
  • Staking MicroTube to CrystalCap

FEATURES

  • Squeeze grips allow for precise application, keeping fingers glue free
  • Locking cap collar prevents leaks and drying out
  • Bonds more surfaces than ordinary glues, including: metal, CryoLoops, wood, paper, cardboard, vinyl, leather, rubber, cork, ceramic, china, textiles, brick and fingers.

CryoTong™ – Long
Applications

Crystal transfer under cryo temperature
Features

Artery clamp style closure30 seconds of cryo temperature180 mm length
Description
The CryoTong is a tool used to manually transfer a crystal mounted on a CrystalCap™ from liquid nitrogen to a magnetic base in a goniometer head positioned in a cryogenic stream, and then back to liquid nitrogen. The one-piece, compact CryoTong is available in two lengths. The long CryoTong is approximately 180 mm in overall length. The artery clamp style maintains the CryoTong in the closed position until the clamp is squeezed, which opens the opposing heads. The heads are non-magnetic stainless steel. The handle is magnetic stainless steel. The inside of the head is machined to closely surround the CrystalCap with loop and crystal in place. A small retaining lip is machined into the lower portion of the head to prevent the CrystalCap from slipping out of the CryoTong when the tool is in the closed position. The CryoTong can maintain the temperature of the crystal at -160°C for up to 30 seconds during room temperature crystal transfers. Choose the proper CryoTong size based upon the pin length required by the configuration of the x-ray data collection hardware used. The 18 mm CryoTong (HR5-112) is to be used with the CrystalCap HT and any other CrystalCap configured for 18 mm.HR5-114 Long CryoTong 18 mm, 180° features the head in alignment with the handle of the CryoTong.

CrystalCap™ Holder
applications
CrystalCap support inside stainless steel dewars
Features
Adjustable heightSupports up to 8 CrystalCaps15 ml vial position for liquid propane500 and 1,000 ml versionsDescription
CrystalCap Holders are convenient stands for holding all CrystalCap™ systems in liquid nitrogen dewars during crystal cryogenic procedures. Available in two sizes. Both holders feature spring-clips to secure the CrystalCap Vials in the holder. Both stands have 3 inches of adjustable Z (height) which allows one to raise or lower the CrystalCaps to the appropriate height, depending upon the liquid nitrogen level in the dewar. Each holder is supplied with a socket driver for height adjustment.500 ml version holds five CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 500 ml dewar. 1,000 ml version holds eight CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 1,000 ml dewar.
HR4-707 CrystalCap Holder – 500 ml
HR4-706  Replacement Height Adjustment Tool

Hampton HR1-008 液氮罐 CX100 (含运输箱)

Hampton HR1-008液氮罐 CX100 (含运输箱)

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

英文名称:CX100 Cryo-Express Dry Shipper

货号:HR1-008

Hampton HR4-837 Micro-Tools II Set

Hampton HR4-837 Micro-Tools II Set

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Hampton HR4-837 Micro-Tools II Set

APPLICATIONS  应用

  • Precision instruments for crystal manipulation   晶体操作精密仪器

FEATURES

  • Made from chemical resistant tungsten steel & hardened tool steel
  • Interchangeable tools tips
  • 8 unique tools designed to extend the original Micro-Tools set
  • Set includes wooden storage case

特征
由耐化学腐蚀的钨钢和硬化工具钢制成
可互换工具提示
8 种独特的工具,旨在扩展原始的微型工具集
套装包括木制储物盒

DESCRIPTION

Micro-Tools II™ Set is an extension to the smallest available precision instruments for laboratory use. These tools are realistically proportioned for macromolecular and small molecule crystallization work. The high quality, precision Micro-Tools II ease microscopic manipulations. The eight specifically engineered Micro-Tools II are useful in a variety of applications in the crystallization lab. Eight tools, a handle and wood storage box.

The Micro-Tools II are designed to be versatile as well as useful for specific crystallization manipulations. For example, the Micro-Manipulator is handy for manipulating long, thin blades or for separating long, thin blade clusters. Awkward positions encountered during crystal manipulation can sometimes be avoided using tools with an unusual and flexible approach angle such as the Micro-Prober 90° and the Micro-Hook 90°. Seeding experiments can be performed using the Micro-Brush. The Ultra Micro-Needles are extremely delicate tools crafted from 5 micron radius tungsten that are very handy for seeding as well as manipulations requiring a soft, fine, and controlled touch.

The Micro-Tools II Set is indispensable during crystal observation, manipulation, seeding, and mounting. The set includes a single anodized aluminum handle which holds each of the eight unique tips, all supplied in an attractive alderwood instrument case. The case provides protective storage of the Micro-Tools as well as a convenient carrying case.

The tips are constructed from hardened tungsten steel and are resistant to most common reagents used for crystal growth. The threaded tool tips are easily interchanged with the threaded aluminum handle. Then overall length of the handle only is 120 mm. The diameter of the tool shaft is 0.25 mm – 0.5 mm (0.01 – 0.02 inches). The actual dimension at the very tip of the tool will vary with the particular tool design.  Each of the Micro-Tools II Set is also available individually, as is the Handle HR4-829 and Carrying Case HR4-831.

描述
Micro-Tools II™ Set 是实验室使用的最小可用精密仪器的扩展。这些工具实际上是为大分子和小分子结晶工作而设计的。高质量、精密的 Micro-Tools II 简化了微观操作。八个专门设计的微型工具 II 可用于结晶实验室的各种应用。八件工具、一个把手和木头储物箱。

Micro-Tools II 的设计用途广泛,可用于特定的结晶操作。例如,微型机械手可方便地操作长而薄的叶片或分离长而薄的叶片簇。有时可以使用具有不同寻常且灵活的接近角的工具(例如 Micro-Prober 90° 和 Micro-Hook 90°)来避免在晶体操作过程中遇到的尴尬位置。可以使用微刷进行播种实验。超微针是极其精致的工具,由 5 微米半径的钨制成,非常适合播种以及需要柔软、精细和可控触感的操作。

Micro-Tools II Set 在晶体观察、操作、播种和安装过程中必不可少。该套装包括一个单独的阳极氧化铝手柄,可固定八个独特的尖端中的每一个,所有尖端都装在一个迷人的桤木乐器盒中。箱子提供微型工具的保护性存储以及方便的手提箱。

尖端由硬化钨钢制成,可耐受用于晶体生长的大多数常用试剂。螺纹工具尖端可与螺纹铝制手柄轻松互换。那么手柄的总长度仅为 120 毫米。工具轴的直径为 0.25 毫米 – 0.5 毫米(0.01 – 0.02 英寸)。工具最尖端的实际尺寸会因特定的工具设计而异。每个微型工具 II 套装也可单独购买,手柄 HR4-829 和手提箱 HR4-831 也是如此。

HR4-837 Micro-Tools II Set each
HR4-839 Micro-Manipulator each
HR4-841 Micro-Knife 45° each
HR4-843 Micro-Prober 90° each
HR4-845 Micro-Brush each
HR4-847 Micro-Hook 90° each
HR4-849 Ultra Micro-Needle, Straight each
HR4-851 Ultra Micro-Needle 30° each
HR4-853 Ultra Micro-Needle 90° each

Hampton HR3-251 PEN-VAC Kit 使用说明

Hampton HR3-251 PEN-VAC Kit 使用说明

APPLICATIONS

  • Holding and manipulating small, flat surfaces such as glass cover slides

FEATURES

  • Self-contained vacuum
  • No power needed
  • Compact

DESCRIPTION

PEN-VAC is a great tool for handling small, flat surfaced objects such as plain and siliconized cover slides, as well as plastic slides. Simply depress the side button, touch the tip to the object to be lifted and release the button. PEN-VAC creates a totally self-contained vacuum that lifts up to 50 grams for up to one minute. Less than an ounce, the lightweight aluminum body fits in a pocket. No power supply needed. The kit includes one PEN-VAC with 5 3/4″ blue body, (3) angled and (3) straight probes with (2) each 1/8”, 1/4”, 3/8” diameter blue silicone vacuum cups . It is packaged in a clear plastic storage case.

HR3-251 PEN-VAC Kit each

笔-VAC试剂盒

应用

  • 保持和操纵小的、平坦的表面,如玻璃盖板滑梯

特征

  • 自给真空
  • 不需要电力
  • 紧凑型

描述

笔-VAC是一个伟大的工具,处理小的,平面表面的物体,如平原和硅化覆盖幻灯片,以及塑料幻灯片。只需按下侧面按钮,按一下要提起的物体的尖端,然后松开按钮。笔-VAC创造了一个完全独立的真空,提升高达50克,长达一分钟。不到一盎司,轻巧的铝制机身就可以装在口袋里了。不需要电源。该试剂盒包括一个5 3/4“蓝色车身的笔-VAC,(3)角度和(3)直探头,每一个1/8”,1/4“,3/8”直径的蓝色硅真空杯,它被包装在一个清晰的塑料储存箱中。

RELATED ITEM(S)
22 mm Siliconized Glass Cover Slides
OptiClear Plastic Cover Slides
18 mm Siliconized Glass Cover Slides
Siliconized Glass Coverslips (Greiner)

Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)

Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)
Hampton research蛋白结晶试剂代理–上海金畔生物
代理优势:货期4周左右。
欢迎访问Hampton research官网或者咨询我们获取更多产品信息。

应用

  • 悬滴结晶
  • 微桥坐滴结晶
  • 透析按钮™的透析结晶

特征

  • 24孔板凸起盖
  • 密封胶适用于24口孔,准备用盖板密封。
  • 适用于直径22 mm的方形和圆形盖板滑片。
  • 光学透明塑料
  • 用途广、成本效益高的结晶平台
  • 适用于HR3-231和HR3-233-22 mm x 0.22 mm硅化圆盖幻灯片和HR3-215和HR3-217-22 mm x 0.22 mm硅化方形覆盖片。

描述

24孔结晶板,用于悬滴或坐滴蒸汽扩散结晶(用于微桥)或透析结晶(当使用与透析按钮)。可堆叠,光学清晰的塑料24孔板与凸起的盖(以允许空间盖幻灯片)和平底为特殊的光学。提高,宽环周围的每个储油层(井)尽量减少交叉污染,并允许每口井分别密封22毫米直径圆或方盖幻灯片。盘子是单独包装和提供应用密封胶。

15.0cmx10.8cm板足迹便于人工打管和良好的存取,同时与一些自动液体处理系统兼容。
近似尺寸:15.0厘米x 10.6厘米x2.2厘米。
近似井大小:1.7厘米x1.6厘米。
典型井容量:500~1000升。
容量:3.5毫升。

VDX Plate with sealant

Applications

 Hanging drop crystallization

Sitting drop crystallization with Micro-Bridges® or Glass Sitting Drop Rods™

 Dialysis crystallization with Dialysis Buttons™

Features

 24 well plate with raised cover

 Sealant applied to 24 wells, ready to seal with cover slides

 Compatible with 22 mm diameter square and circle cover slides

 Optically clear plastic

 Extremely versatile and cost-effective crystallization platform

Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Description
24 well crystallization plate for hanging drop or sitting drop vapor diffusion crystallization (when used with Micro-Bridges or Glass Rods), or dialysis crystallization (when used with Dialysis Buttons). Stackable, optically clear plastic 24 well plates with raised covers (to allow room for cover slides) and flat bottoms for exceptional optics. Raised, wide rings around each reservoir (well) minimize cross contamination and allow each well to be individually sealed with 22 mm diameter circle or square cover slides. Plates are individually wrapped and supplied with applied sealant. 15.0 cm x 10.8 cm plate footprint is convenient for manual pipetting and well access while at the same time compatible with some automated liquid handling systems. Approximate dimensions: 15.0 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.7 cm x 1.6 cm. Typical well volume: 500 to 1,000 µl. Well capacity: 3.5 ml.

CAT NO NAME DESCRIPTION
HR3-172 VDX Plate with sealant 24 plate case
HR3-170 VDX  Plate with sealant 100 plate case
HR3-171  VDX™ Plate with sealant 40 plate case

Hampton 盖玻片分配器 Glass Cover Slide Gizmo Dispenser

Hampton 盖玻片分配器 Glass Cover Slide Gizmo Dispenser

APPLICATIONS

  • Dispense circle or square cover slides for hanging drop crystallization

FEATURES

  • Dispense siliconized or plain cover slides
  • Platform displays one to six cover slides at a time for 18 and 22 mm slides
  • Black platform for slides allows one to see if drops are clear or precipitated
  • Available for 12, 18 or 22 mm diameter cover slides for either original (0.22 mm) and thick (0.96 mm)
  • Platform displays one to twelve cover slides at a time for 12 mm slides

HR8-163 Cover Slide Gizmo for 22 x 0.96 mm Circle

DESCRIPTION

The Cover Slide Gizmo dispenses siliconized or plain slides for convenient drop building during hanging drop vapor diffusion crystallization. Load the cover slides into the dispenser. A clear plastic cover or sealed dispenser keeps slides clean. Slide the loaded dispenser along the platform and six cover slides are dispensed onto the platform. A black background on the platform makes for easy drop visualization as one builds the drop(s). Use finger or forceps to place the completed cover slides onto the crystallization plate.

Each Cover Slide Gizmo includes a single cover so you only need to order HR8-166 if you lose the cover for the HR8-162 or HR8-164. Manual operation, no power required. See the Glass Cover Slide Gizmo Dispenser at work at minute 1:06.

CAT NO NAME DESCRIPTION
HR8-167 Cover Slide Gizmo Dispenser for 12 x 0.22 mm circle cover slides
HR8-168 Cover Slide Gizmo Dispenser for 12 x 0.96 mm circle cover slides
HR8-169 Cover Slide Gizmo Dispenser for 18 x 0.22 mm circle cover slides
HR8-170 Cover Slide Gizmo Dispenser for 18 x 0.96 mm circle cover slides
HR8-162 Cover Slide Gizmo Dispenser for 22 x 0.22 mm circle cover slides
HR8-163 Cover Slide Gizmo Dispenser for 22 x 0.96 mm Circle Cover Slides
HR8-164 Cover Slide Gizmo Dispenser for 22 x 0.22 mm square cover slides
HR8-165 Cover Slide Gizmo Dispenser for 22 x 0.96 mm square cover slides
HR8-166 Replacement Cover Fits HR8-162 or HR8-164

Hampton 22mm硅化盖玻片 22 mm Siliconized Glass Cover Slides

Hampton 22mm硅化盖玻片 22 mm Siliconized Glass Cover Slides

APPLICATIONS

  • Siliconized glass cover slides for hanging & sitting drop crystallization.
  • Hanging drop crystallization
  • Sitting drop crystallization
  • Sandwich drop crystallization

FEATURES

  • High purity of glass
  • Siliconized, hydrophobic glass surface.
  • 0.22 mm & 0.96 mm glass thickness
  • 22 mm glass diameter
  • Circle & square
  • 0.22 mm glass thickness is UV Compatible (>85% transmission)

HR3-231/HR3-233 22 mm x 0.22 mm Siliconized circle cover slide (left) and HR3-247/HR3-249 22 mm x 0.96 mm Thick siliconized circle cover slide (right)

DESCRIPTION

Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution.

These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510) or Dow Corning 7 Release Compound (HR3-508) to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.

Critical surface tension Untreated glass 78 dynes/cm Siliconized glass 31 dynes/cm Surface resistivity Untreated glass 1×1012 ohms Siliconized glass 1.2 x 1013 ohms Coefficient of friction static, glass slide on glass slide Untreated 0.9-1.0 Siliconized 0.2-0.3 Protein adsorption (100 hours) Untreated glass 0.13 mg/mm2 Siliconized glass 0.01-0.02 mg/mm2

The following slides are UV transmissible (>85%):
HR3-277 and HR3-279 – 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

应用

  • 硅化玻璃罩滑片,用于悬挂和坐滴结晶。
  • 悬滴结晶
  • 坐滴结晶
  • 夹层滴结晶

特征

  • 高纯玻璃
  • 硅化疏水玻璃表面。
  • 0.22毫米及0.96毫米玻璃厚度
  • 22毫米玻璃直径
  • 圆与方
  • 0.22毫米玻璃厚度与紫外线兼容(透射率>85%)

描述

硅化玻璃覆盖幻灯片允许一个液滴悬浮在一个位置,为周围的储油层溶液的蒸汽扩散提供了近乎佳的条件。

这些硅化玻璃覆盖幻灯片提供了一个一致的,高质量的完成结晶实验。疏水性表面会产生一滴“很好”的水滴,在玻璃上不会变平。硅化表面防止晶体粘附并沉淀到玻璃表面。使用陶氏康宁真空润滑脂(HR3-510)或陶氏康宁7释放化合物(HR3-508)密封滑动板。可在12,18或22毫米直径圆和22毫米直径方格。有0.22毫米或0.96毫米玻璃厚度。0.96毫米厚的幻灯片在晶化处理过程中几乎是不可破碎的。

临界表面张力未处理玻璃78 dynes/cm硅化玻璃31 dynes/cm表面电阻率未处理玻璃1×1012欧姆硅化玻璃1.2×1013欧姆摩擦系数静态,玻璃玻片上未处理0.9~1.0硅化0.2~0.3蛋白吸附(100小时)未处理玻璃0.13mg/mm2硅化玻璃0.01-0.02mg/mm2

以下幻灯片为紫外线可传输(>85%):
HR3-277和HR3-279-12毫米x 0.22毫米硅化圆盖幻灯片
HR3-231和HR3-233-22毫米x 0.22毫米硅化圆盖幻灯片
HR3-239和HR3-241-18毫米x 0.22毫米硅化圆盖幻灯片
HR3-215和HR3-217-22毫米x 0.22毫米硅化方盖幻灯片

CAT NO NAME DESCRIPTION
HR3-231 22 mm x 0.22 mm Siliconized circle cover slides 1.0 ounce pack (~120 slides)
HR3-233 22 mm x 0.22 mm Siliconized circle cover slides 10.0 ounce case (~1,200 slides)
HR3-247 22 mm x 0.96 mm Thick Siliconized circle cover slides 3 ounce pack (~75 slides)
HR3-249 22mmx 0.96mm Thick Siliconized circle cover slides 30.0 ounce case (~750 slides)
HR3-215 22 mm x 0.22 mm Siliconized square cover slides 1.0 ounce pack (~100 slides)
HR3-217 22 mm x 0.22 mm Siliconized square cover slides 10.0 ounce case (~1,000 slides)
HR3-223 22mmx0.96mm Thick Siliconized square cover slides 4.0 ounce pack (~75 slides)
HR3-225 22mmx0.96mm Thick Siliconized square cover slides 40.0 ounce case (~750 slides)

Hampton 18 mm硅化盖玻片 18 mm Siliconized Glass Cover Slides

Hampton 18 mm硅化盖玻片 18 mm Siliconized Glass Cover Slides

应用

  • 用于悬挂和坐滴结晶的硅化玻璃盖板滑片
  • 悬滴结晶
  • 坐滴结晶
  • 夹层滴结晶

特征

  • 高纯玻璃
  • 硅化的、疏水性玻璃表面
  • 0.22毫米及0.96毫米玻璃厚度
  • 18毫米玻璃直径
  • 0.22毫米玻璃厚度与紫外线兼容(透射率>85%)

描述

硅化玻璃覆盖幻灯片允许一个液滴悬浮在一个位置,为周围的储油层溶液的蒸汽扩散提供了近乎佳的条件。

这些硅化玻璃覆盖幻灯片提供了一个一致的,高质量的完成结晶实验。疏水性表面会产生一滴“很好”的水滴,在玻璃上不会变平。硅化表面防止晶体粘附并沉淀到玻璃表面。使用陶氏康宁真空润滑脂(HR3-510)或陶氏康宁7释放化合物(HR3-508)密封滑动板。可在12,18或22毫米直径圆和22毫米直径方格。有0.22毫米或0.96毫米玻璃厚度。0.96毫米厚的幻灯片在晶化处理过程中几乎是不可破碎的。

临界表面张力未处理玻璃78 dynes/cm硅化玻璃31 dynes/cm表面电阻率未处理玻璃1×1012欧姆硅化玻璃1.2×1013欧姆摩擦系数静态,玻璃玻片上未经处理的0.9-1.0硅化0.2-0.3蛋白吸附(100小时)未处理玻璃0.13mg/mm2硅化玻璃0.01-0.02 mg/mm2

以下幻灯片为紫外线可传输(>85%):
HR3-277和HR3-279-12毫米x 0.22毫米硅化圆盖幻灯片
HR3-231和HR3-233-22毫米x 0.22毫米硅化圆盖幻灯片
HR3-239和HR3-241-18毫米x 0.22毫米硅化圆盖幻灯片
HR3-215和HR3-217-22毫米x 0.22毫米硅化方盖幻灯片

APPLICATIONS

  • Siliconized glass cover slides for hanging & sitting drop crystallization
  • Hanging drop crystallization
  • Sitting drop crystallization
  • Sandwich drop crystallization

FEATURES

  • High purity of glass
  • Siliconized, hydrophobic glass surface
  • 0.22 mm & 0.96 mm glass thickness
  • 18 mm glass diameter
  • Circle
  • 0.22 mm glass thickness is UV Compatible (>85% transmission)

DESCRIPTION

Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution.

These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510) or Dow Corning 7 Release Compound (HR3-508) to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.

Critical surface tension Untreated glass 78 dynes/cm Siliconized glass 31 dynes/cm Surface resistivity Untreated glass 1×1012 ohms Siliconized glass 1.2 x 1013 ohms Coefficient of friction static, glass slide on glass slide Untreated 0.9-1.0 Siliconized 0.2-0.3 Protein adsorption (100 hours) Untreated glass 0.13 mg/mm2 Siliconized glass 0.01-0.02 mg/mm2

The following slides are UV transmissible (>85%):
HR3-277 and HR3-279 – 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

CAT NO NAME DESCRIPTION
HR3-239 18 mm x 0.22 mm Siliconized circle cover slides 0.5 ounce pack (~100 slides)
HR3-241 18 mm x 0.22 mm Siliconized circle cover slides 5.0 ounce case (~1,000 slides)
HR3-515 18mmx0.96mm Thick Siliconized circle cover slides 1 oz pack (~45 slides)
HR3-517 18mmx0.96mm Thick Siliconized circle cover slides 10 oz case (~450 slides)

Hampton 石蜡和硅润滑油Paraffin & Silicon Oil

Hampton 石蜡和硅润滑油Paraffin & Silicon Oil

Applications  应用
Microbatch crystallization    microbatch 结晶
Features  特征
Under oil crystallization 在油中结晶
Protect the sample from oxidation  保护样品免于氧化
Screen different temperatures without condensation   屏幕不同温度下不凝结
Description   描述 
Oils used for microbatch and modified microbatch crystallization under oil.

使用的油和改性 microbatch microbatch 结晶油。

Al’s Oil is a 50:50 (volume:volume) mixture of Paraffin Oil and Silicon Oil. Al’s Oil is named after it’s inventor, Allan D’Arcy.

Al 是机油的 50 ∶ 50 (体积 ∶ 体积) 混合物的石蜡油和硅油。Al 的石油是其发明者的名字命名 , Allan D ‘Arcy) 。

Paraffin & Silicon Oil

Paraffin oil
Synonym: Mineral oil
CAS Number [8042-47-5]
EC Number 232-455-8
RTECS PY8047000
MDL Number MFCD00131611
Appearance Colorless, clear, viscous liquid
Refractive Index n20/D 1.467 (literature) n20/D 1.468
IR Spectroscopy Grade
Density 0.838 g/mL at 25°C (literature) 0.85 g/ml at 20°C
Viscosity 40-42 CST at 25°C

Silicon Oil 
Synonyms: Octamethyltrisiloxane
CAS Number: 107-51-7
Appearance: Colorless, clear viscous liquid
Melting Point: -86°C
Boiling Point: 152°C
Refractive Index: 1.38 at 25°C
Viscosity: 1 CST at 25°C
Specific Gravity: 0.82 at 25°C
Density: 0.82 g/mL at 25°C
Surface Tension: 17.4 mN/m

Hampton 石蜡和硅润滑油Paraffin & Silicon Oil

CAT NO NAME DESCRIPTION
HR3-411 Paraffin Oil 100% – 250 ml
HR3-421 Paraffin Oil 100% – 1 L
HR3-415 Silicon Oil 100% – 250 ml
HR3-423 Silicon Oil 100% – 1 L
HR3-413 Al’s Oil (50:50 Paraffin:Silicon) – 250 ml
HR3-417 Combo Oil Pack (Paraffin, Al’s, & Silicon Oil) – 250 ml of each